top of page

FB-21

FF-21-460x300.jpg

DESCRIPTION:

FF-21 RC Model Designed by: Ken Tanpinco
This RC model is a completely original design by Ken Tanpinco. The original RC model design was made with Dollar Tree Foamboard and covered with sealing/packing tape. Other materials such as Depron and Fan Fold Foam may be used to make this model.

 

BASIC RC MODEL NOTES:

  • Wing Span: 21 Inches (53.34cm)

  • Length: 25.6 Inches (65.02cm)

  • AUW: 17 Ounces (482gm) (As Built with Foamboard, Depron or Fan Fold may result in a lighter model)

  • Servos: 2 Micro (Metal Gear Recommended)

  • Motor: Turnigy H2218-2500kv Brushless Outrunner (2212/6 may be used for basic setup)

  • Speed: 65mph to 90+mph (104.5kph to 144.8kph) depending on motor used

  • Required Radio: Minimum 4-Channel with Delta mixing (Recommended 2.4ghz)

  • Flight Skill Required: Intermediate to Advanced

  • Building Skill Required: Intermediate

​

Free PDF Plan Below:

bottom of page