DESCRIPTION:
FF-35V2 70mm EDF RC Model Designed by: Paul Petty
This Version 2 RC model is inspired by the F-35C Joint Strike Fighter version used by the US Navy. This model is more scale looking in appearance than the version one FF-35 model also available on this website.  The fuselage has more 3D details than the Version 1 FF-35 and also uses a 70mm EDF.  The old version 1 plane used a prop.  This original RC model design was made with Dollartree Readiboard  White Foamboard with one side painted with Testor's model primer gray model paint. Other materials such as Dollar Store Foamboard, Depron Foam and Fan Fold Foam may be used to make this model.

 

BASIC RC MODEL NOTES:

• Wing Span: 29 Inches (73.66cm)

• Length: 35.95 Inches (91.31cm)

• All Up Weight: 36.00 Ounces (1020.58gm) (As Built with Dollartree Foamboard, Depron or Fan Fold will result in much lighter model)

• Servos: 2 Micro 12gm (Metal Gear Recommended)

• Motor: 70mm 4S rated EDF, try to find one that makes 1200 grams of thrust or more.

• 4S Lipo Battery 3000mah to 3300mah 70C+

• Speed: 60+mph (96.5+kph) depending on EDF and battery used.

• This model uses Quad-Elevons for control surfaces.

• Required Radio: Minimum 4-Channel with Delta Mixing (Recommended 2.4ghz)

• Flight Skill Required: Intermediate to Advanced

• Building Skill Required: Intermediate (not recommended for absolute beginners)

​

​