DESCRIPTION:

FF-Stingray RC Model Designed by: Paul Petty
This RC model is a unique design, not based on any real plane. The original RC model design was made with Dollartree Readyboard Foamboard. This plane has dual front mounted motors and an optional rudder. It is a great flying plane and the first dual motor foamboard plane posted to our website.  Other materials such as Depron Foam and Fan Fold Insulation Foam may be used to make this model, but may require the use of carbon or wood main wing spar.

 

BASIC RC MODEL NOTES:

• Wingspan: 29.00 Inches (73.66cm)

• Length: 22.59 Inches (56.38cm)

• All Up Weight: 21.5 Ounces (638 grams) (As Built with Readyboard Foamboard)

• Servos: 3 Micro Servos, 5 to 12 gram recommended (Metal Gear Recommended)

• Motor: 2 T-Motor F40 1950kv Brushless Drone Motors

• ESC:  2 Turnigy 30A Brushless ESC's with BEC

• Props: 2 6x4.5 Drone Props

• Battery: 4S 1500mah Lipo Battery (60C or better recommended)

• Speed: 70+mph (112+kph) depending on motors used

• Required Radio: Minimum 6-Channel with Delta Mixing (Recommended 2.4ghz)

• Flight Skill Required: Beginner to Advanced (Depending on how you set up the controls)

• Building Skill Required: Beginner to Intermediate

​

Free PDF Plan Below: